GILSON PERISTALTIC PUMPS MINIPULS 3
Gilson MINIPULS 3 Peristaltic Pump (Used, Tested, Fully Operational)
You are purchasing a used Gilson MINIPULS 3 peristaltic pump, designed for high-resolution and precise liquid handling in laboratory processes. This peristaltic pump combines microprocessor speed control with a high-torque stepper motor to deliver smooth, low-pulse flows without causing sample degradation. It has been thoroughly tested and is guaranteed to be fully operational and in excellent working condition.
✅ Condition: Used, fully operational, and in good working order.
✅ Guarantee: Fully functional and ready for use.
A peristaltic pump that delivers high resolution and precision speed and control for delivering smooth, low pulse flows without sample shearing or degradation.
Gilson’s MINIPULS 3 is a peristaltic pump specifically designed to meet process laboratory liquid handling needs. The MINIPULS 3 peristaltic pump combines microprocessor speed control with a high-torque stepper motor. Chemical-resistant pump heads, equipped with 10 stainless steel rollers, set the performance standard in producing smooth, low-pulse flow and reproducible flow rates at higher pressures.
Key Features
- Quickly Interchangeable Pump Heads:
– Standard flow rates (1, 2, 4, or 8 channels)—0.3 µL/min to 30 mL/min at a maximum pressure of 0.5 MPa. – High flow rates (2 or 4 channels)—1 mL/min to 220 mL/min at a maximum pressure of 0.3 MPa. – Each head accepts different tubing sizes, making the multipurpose pump head an economical choice
- Keypad Functions: Start/Stop, Direction of Flow, Increase/Decrease Flow, Prime
- Head Speeds: Adjustable from 0 to 48 rpm by increments of 0.01 rpm up to 9.99 rpm and by 0.1 rpm at above 10 rpm
- Motor Speed Stability: Maximum of 0.5% for any variation of line voltage, torque, or temperature (from 0 to 40°C)
- Compatibility: Easy to integrate into your existing system – control through the keypad or remotely through another device (by electrical contact or computer)
- Compact Design: 15 cm x 17.5 cm x 18 cm (W x D x H); lightweight at 4 kg
Specification
|
Flow rate
|
Standard model: 0.3 µL/min to 30 mL/min (72 psi/5 bar/0.5 MPa max)
|
|
High flow model: 1 mL/min to 220 mL/min (42 psi/3 bar/0.3 MPa max)
|
|
Peristaltic tubing diameter
|
Standard model: 0.25 to 4 mm (i.d.)
|
|
High flow model: 2 to 8 mm (i.d.)
|
|
Head speed
|
Continuous adjustment from 0 to 48 rpm by 0.01 rpm increments
|
|
Up to 9.99 rpm and by 0.1 increments above 10 rpm
|
|
Pump head
|
Standard model: 1, 2, 4 or 8 channel heads with 10 stainless steel rollers per head
|
|
High flow model: 2 or 4 channel heads with 5 stainless steel rollers per head
|
|
Tubing materials
|
PVC for most applications – Isoversinic® for chemical inertness – Silicone for biocompatibility – PharMed® for FDA and USP class 4
|
Operating Conditions
|
Motor speed stability
|
0.5% for any variation of line voltage – Torque or temperature
|
|
Line voltage
|
90V to 132V for 110 voltage selection: 180V to 264V for 220 voltage selection
|
|
Line frequency
|
47 to 63 Hz
|
|
Power consumption
|
Full load 45 W at 220V – No load 35 W at 220V
|
|
Operating temperature
|
0-40° C No warm-up time required
|
|
Dimensions (w x h x d)
|
15 x 18 x 17.5 cm (5.0 x 7.1 x 6.9 in)
|
|
Weight
|
4 kg (9 lbs)
|
|
Input/Output options
|
Contact closure: Two TTL-compatible inputs for control of start/stop and direction of flow
|
|
Voltage input: One 5V analog signal for variable control of motor speed
|
|
Serial: Gilson Serial Input/Output Channel (GSIOC) – RS-422A interface
|
|
Keypad functions
|
Start – Stop – Direction of flow – Increase and decrease flow – Prime
|
The Gilson MINIPULS 3 Peristaltic Pump is ideal for a variety of laboratory applications requiring precise, low-pulse liquid handling. Some common applications include:
- Molecular Biology: Accurate fluid transfer for PCR setups, gel electrophoresis, and reagent mixing.
- Pharmaceutical Research: Dosing and dispensing of liquids with controlled flow rates for drug formulation and testing.
- Chemical Processes: Reliable fluid handling in chemical analysis, titrations, and synthesis.
- Bioprocessing: Transfer of delicate samples without degradation or shear stress, suitable for cell culture media or other biological fluids.
- General Lab Use: Ideal for consistent, reproducible liquid handling in applications such as mixing, feeding, and dispensing.
Included:
- Gilson MINIPULS 3 Peristaltic Pump
- Interchangeable Pump Head
NeuroLabParts provided us with great quality second hand Patch clamp equipment. The prices were very affordable and the items were almost brand new. Their customer service, maintenance and warranty services were GREAT and they helped us a lot in setting up our lab.
They would even follow up with us for updates on the performance of equipment and are always ......
Maximize
Follow us