Multi Channel Systems STG 4008 Stimulus Generator

Multichannel system(MCS) stimuli generator STG4008 guaranteed to be fully operational as 8-channel general-purpose stimulus generator for current and voltage-driven electrical stimulation, 4000 series, with integrated stimulus isolation unit for each output channel. Operating in download and streaming mode (continuous downstreaming of pulses from connected computer). MC Stimulus II program with advanced features stimuli are created by entering the desired pulses rectangular, ramp, or sine waveforms as well as current & voltage driven stimulation with 8 independent output channels.

Description:

• Multichannel stimuli generator is a reliable and efficient tool for any research or experimental setup.
•  With 8 independent analog output channels and a USB 2.0 High Speed interface, it allows for easy connection to a computer.
• The output voltage range is from -8 V to +8 V, with a maximum output current of ± 20 mA. 
• The STG4008 model has a time lag of 15 (± 2) μs between the Sync Out signal and the voltage output. 
• It also features a 14-bit resolution and an output current resolution of 2000 nA (with ± 16 mA).
•  Has three phase pulse type as Rectangular, Ramp and Sine wave.
• This generator is designed for use in a variety of settings, including neuroscience, psychology, and engineering.

STG4008 (8-channel stimulus generator) has;
– 8 analog voltage outputs: -8 V to +8 V @ ±20 mA (2 mm connector).
– 8 analog current outputs: -16 mA to +16 mA @ 120 V (2 mm connector).
– 8 trigger inputs (BNC connector).
– 8 trigger  outputs (BNC connector).
– Digital I/O-port (8 bit input, 8 bit output).
– USB 2.0 High Speed.
– Supply voltage: 100-240 VAC.
– Time resolution: 20 µs.

Pin Layout Digital I / O

• Pin 1 - 8 Digital input D0 - D7 for “Extended Multi-File Mode” 
• Pin 9 - 16 Digital output D8 - D15 (not connected) 
• Pin 17 - 25 GND (ground)

 This STG4008 is equiped with original power cable , user manual and brief case.